FDNY CoF Low PSI Oil Burner Operator P-99 Practice Test

These questions are part of the practice quiz. Start practicing

• What are instruction cards for oil burning systems intended for?
• How frequently should No. 6 fuel-oil burner nozzles be cleaned?
• What is a common purpose of heat exchangers in oil burning systems?
• What must be completed before a boiler can be placed in operation after construction?
• Which of the following is NOT one of the four safety controls to be installed with each automatic burner?
• After repairs on fuel burning equipment, what must the licensed operator do with the equipment?
• What alerts the operator in case of excessive smoke or improper combustion?
• What is the maximum allowable surface temperature for combustible construction materials during operation of heating, combustion, and cooking equipment?
• What signs might indicate that the burner nozzle needs cleaning or replacement?
• If an oil burner fails to start, what is the first thing to check?
• What could excessive smoke or soot around the burner indicate?
• On which side of the shut-off valve shall a relief or pressure regulating valve be provided?
• Which component is responsible for mixing air and fuel for combustion in an oil burner?
• What must be done with any instruction cards for oil burning systems?
• Which of the following choices should be done to ensure proper air-to-fuel ratio?
• How many BTUs are liberated each time one pound of carbon is burned?
• What is a primary concern related to an improperly functioning oil burner?
• What device indicates an obstruction in the suction line?
• Where will the remote control for the oil burner typically be located?
• What maintenance task is crucial to ensure the efficiency of an oil burner?
• What maintenance task is essential for ensuring optimal burner operation?
• After ignition, how is combustion maintained in the combustion chamber?
• Where is fuel oil typically stored?
• In a step to ensure safety, what must happen if a manual reset pressuretrol is triggered?
• If the combustion process is inefficient, what is likely to be produced?
• What is the introduction of air from the fan into the combustion chamber after the oil has exited the nozzle called?
• What part prevents fluid leakage from the oil burner?
• Tight closing ____ may be installed with approved automatic draft and combustion controls.
• Which low-pressure control is responsible for shutting down the oil burner when there is insufficient air for combustion?
• What is the purpose of a remote control for an oil burner?
• What is the first step when changing an oil filter in a burner system?
• What type of combustion occurs when there is an insufficient oxygen supply?
• For safety, what must be monitored to prevent accidents in an oil burner system?
• What is typically required for oil to be suitable for use in oil burners?
• What is one common safety precaution when operating oil burners?
• Which of the following methods is NOT used to heat oil in storage tanks, according to safety guidelines?
• Which condition could cause a hazardous situation, leading to emergency measures?
• If ventilation for combustion is supplied mechanically, the ventilating system shall be ____ interlocked with the burner.
• In low pressure oil burners, the oil and air mixture is delivered at what pressure?
• Which device is used to measure pressure below atmospheric pressure?
• What are the two principal elements of fuel oil?
• What is the primary function of a relief valve in an oil system?
• What can result from an excessively high air-to-fuel ratio in combustion?
• Which of the following indicates a need for maintenance in an oil burner?
• Excessive smoke detection triggers what response from the system?
• What can result from carbon deposit buildup in the combustion chamber?
• Oil circulates through the system back to the storage tank through the ____.
• Which safety feature automatically turns off an oil burner during a flame failure?
• What role does the speed of 3,400 RPM play in oil burner operation?
• What type of power supply is typically required for most low-pressure oil burners?
• What is a possible result of a pressuretrol failure?
• A red, smoky flame is an indication of what condition?
• What must happen to oil in order to support combustion?
• What is the purpose of the burner ignition system?
• Which tool is essential for measuring oil pressure in a burner system?
• If the oil spray mixture contacts the walls of the combustion chamber, what can occur?
• What provides the supply of oil for combustion in an oil burner?
• In an oil burner, what does a flickering flame often indicate?
• What action can be taken to stop oil flow in the event of excessive vacuum readings?
• What is the status of using crankcase refuse oil as fuel-oil?
• Which control is essential for monitoring ignition in an automatic oil burner?
• What are the three key areas that must be tested prior to operating any fuel-burning and storage installation?
• Which factor is essential for an oil burner to function properly?
• What two things are made easier by pre-heating the oil?
• What is the purpose of atomization in an oil burner?
• Which of the following is NOT a commercial grade hydrocarbon oil?
• What is the consequence of a malfunctioning safety valve?
• What is the typical color of heating oil?
• What is the purpose of the shut-off valve located near the burner?
• At what RPM is oil typically atomized in a burner?
• What is the purpose of a fuel oil filter in an oil burner system?
• What must be done to No. 6 fuel-oil due to its consistency?
• Which situation indicates that an oil burner requires maintenance?
• Which automatic electric control for steam boilers will shut down the burner if water levels drop below a safe point?
• Which classification of equipment produces combustion temperatures of 600° F or less?
• All non-fully automatic oil burning installations must be operated under the direct supervision of a person holding what?
• What is the function of a pressure relief valve in an oil burner system?
• What does the abbreviation psi stand for?
• Which electrically operated valve will shut down the burner if there is an ignition or combustion failure?
• What could excessive air supply lead to in an oil burner?
• What does a high-limit switch do in an oil burning system?
• Why is it important to monitor flue gases from an oil burner?
• Which device is responsible for transforming liquid fuel into vapor for combustion?
• Where is the safety valve/pop-off valve typically located?
• What is a common method for testing oil burner combustion efficiency?
• What is the primary function of an oil burner?
• What are the walls of the combustion chamber made of?
• What safety device is used to prevent backfire in an oil burner system?
• What may be present in the return line to ensure the oil is maintained at the proper temperature for easy circulation?
• Which of the following is a characteristic of complete combustion?
• What effect does low pressure have on an oil burner’s efficiency?
• Which maintenance task is crucial for the safe operation of oil burners?
• What is the primary purpose of mixing air with oil in an oil burner?
• How does the steam pressure gauge contribute to boiler safety?
• Under what condition should an oil burner’s pump be replaced?
• What is oil atomized by?
• Why is it essential to check the fuel tank for water contamination?
• What is the function of a photoelectric cell in an oil burner system?
• What is a common consequence of an improper air-to-fuel ratio?
• What is necessary for the efficient function of a photoelectric cell in flame detection?
• Which fuel-oil is known to contain the most sediment?
• How can air drafts affect the operation of an oil burner?
• Which automatic electric control shuts down the oil burner when steam pressure reaches a desired level?
• Which of the following components is typically found on or near the top of a steam boiler?
• What can be monitored to ensure proper operation within the oil burner system?
• What does the high temperature safety control monitor in an automatic burner?
• What is the purpose of the ignition electrode in an oil burner?
• What can a technician do to diagnose a malfunctioning burner?
• Which valve is crucial to stop oil flow for cleaning and maintenance purposes?
• What action should be taken if an oil burner emits smoke?
• For manually operated burners using storage tanks with 60 gallons or less capacity, where can the remote control for the oil burner be installed?
• In an oil burning system, what is most likely a consequence of ignoring an oil leak?
• What type of oil is commonly used in low-pressure oil burners?
• Which component is crucial for controlling the oil flow in a burner system?
• Between what temperatures must No. 6 fuel-oil be maintained in the storage tank?
• Where shall a shut-off valve be located when a single tank and a single burner are installed?
• Why is proper combustion air vital for an oil burner?
• Where should regular maintenance checks be performed in an oil burner system?
• How frequently must boilers be inspected, including chimney connections?
• What does "sooting" refer to in the context of an oil burner?
• What is the result of incomplete atomization of fuel oil in an oil burner?
• Which condition could lead to an unstable fuel supply affecting the burner?
• What do excessive vacuum readings typically indicate?
• What is the result of proper oil temperature maintenance in the system?
• What does the term "draft" refer to in the context of oil burners?
• What can occur if the proper air-to-fuel ratio is not maintained in an oil burner?
• What is the maximum allowable oil pressure for low-pressure oil burners?
• What function does the stack switch/primary control perform?
• What results from incomplete combustion?
• Which valve is electrically operated and controls the flow to the atomizer?
• Which factor is not typically related to the stability of a burner flame?
• What is the purpose of a manual reset pressuretrol?
• When does the stack switch/primary control become active?
• What must no oil burner be installed without being connected to?
• Which control operates the oil burner during summer for domestic hot water needs?
• What should be done if unusual noises are heard from an oil burner?
• Which component helps to regulate the flow of oil to prevent over-pressurization?
• What document must the owner of a boiler file with the commissioner each year?
• What role does a thermostat play in an oil burning system?
• Which of the following is NOT a method used to heat oil in storage tanks?
• What should be regularly inspected for proper function in steam boilers?
• Which valve is used to relieve excessive steam pressure?
• What type of control is the smoke alarm categorized as?
• What should be checked if the burner flame flickers frequently?
• Which of the following must be included in the inspection prior to operation of a boiler?
• What device will shut down an oil burner if it detects no visible flame?
• What is the typical consequence of improper maintenance of an oil burner?
• What should consistently be visible in the gauge glass during boiler operation?
• What is the term used for heat in the combustion chamber that maintains the fire after ignition is turned off?
• What is the primary function of a safety valve in a steam system?
• What is the primary reason for using a secondary combustion air supply?
• What does oil burner efficiency measure?
• What type of valve is a shut-off valve classified as?
• A white, dazzling flame indicates the presence of what?
• What device prevents combustion from occurring inside the return line?
• What component is used to regulate the flow of oil in an oil burner system?
• What indicates proper functioning of oil burner ignition?
• Dampers in flues must be constructed to ensure they cannot completely ____ the passage of flue gases at any time.
• What is the likely effect of a fuel filter blockage on a burner's performance?
• Which agency regulates the operation of oil burners in New York City?
• How many cubic feet of air are required per gallon of oil consumed in oil burners?
• What commonly triggers the activation of a pressuretrol?
• Why is it important for the oil burner to shut down at a specific steam pressure?
• Which action is necessary for handling No. 6 fuel-oil during operation?
• For what purpose is pressure in a storage tank prohibited?
• Which fuel-oil is considered the heaviest commercially available fuel-oil?
• Where is the steam pressure gauge typically located?
• How is the air-to-fuel ratio adjusted in an oil burner?
• What should a burner operator do if they notice persistent flickering in the flame?
• What circulates the oil throughout the system?
• What device is used to raise oil temperature for better pumping and atomization?
• What is the typical voltage rating for ignition transformers in oil burners?
• What is a preventative measure to ensure stable flame operation?
• What device is used to indicate the water level in a steam boiler?
• What is a potential hazard of oil burner operation?
• What does dense, black smoke and soot indicate in an oil burner?
• What is the term for the air that contacts the oil prior to leaving the nozzle?
• What is the chemical union of oxygen with the hydrogen and carbon in fuel-oil?
• What temperature does heavy oil such as No. 6 fuel-oil need to be raised to before combustion?
• What is the atomized oil mixed with in the combustion chamber before being burned?
• What device removes most contaminants from the oil before it reaches the burner?
• What is the purpose of a nozzle in an oil burner?
• Which device ensures that an oil burner has an adequate air supply for combustion?
• What is caused by dirty or damaged nozzles?
• Why is it important to vent the area during puff-back conditions?
• What device heats the oil further before it enters the burner for combustion?
• What tool is used to measure oil pressure in an oil burner system?
• The primary control for an oil burner is critical for what purpose?
• How does low water cut-off contribute to boiler safety?
• What could be a sign of incomplete combustion in an oil burner?
• How does room temperature affect the operation of an oil burner?
• What is the primary function of the stack switch?
• Which of the following is a common type of low-pressure oil burner?
• What role does the fuel filter play in an oil burner?
• What is the minimum airflow requirement in CFM for each gallon of oil per hour required to fire equipment to gross output?
• Which component ignites the oil-air mixture in an oil burner?
• What occurs when oil pumped to the combustion chamber is not properly broken up?
• What will happen if there is a blockage in the chimney or flue passage?
• A correctly adjusted oil burner flame should exhibit which color flame body?
• Why is it important to maintain certain temperatures for No. 6 fuel oil in storage?
• What is the primary control's function in an oil burner?
• What can cause the burner flame to flicker?
• What type of flame indicates a well-adjusted oil burner?
• When must you notify the FDNY about changes in your oil burner operation?
• What is the main combustion controller called?
• What is the result of water in the fuel-oil?
• What is the end product of complete combustion?
• What is the primary purpose of the atomizing cup/spinner in an oil burner?
• If the fuel is not supplied with the proper amount of oxygen, what is the amount of BTU of heat that is liberated?
• A defective oil cut-off valve can lead to which issue?
• What can after-drip lead to?
• What is the function of a thermocouple in an oil burner?
• Which type of flame indicates proper oil burner operation?
• What is a condition that can lead to puff-back in a burner?
• What type of combustion process occurs in an oil burner?
• In an oil burner system, what does a higher oil temperature result in?
• How often should oil burners be inspected and maintained?
• What maintenance action can prevent flickering flames in oil burners?
• What classification pertains to equipment with combustion temperatures of 1000° F or greater?
• What does the term "combustion efficiency" in oil burners typically refer to?
• What is the first step to perform if puff-back conditions are present?
• What contaminant is typically found in fuel-oil coming from the storage tank?
• Why is it essential to keep a log of oil burner operation?
• Which valve is provided for safety if the pressure becomes too great?
• What is the most common cause of burner puff-back related to ignition?
• What type of oil is No. 4 fuel classified as?
• Where should the smoke alarm be mounted?
• What is the minimum size that overflow pipes must be in relation to supply pipes?
• What is the normal steam pressure for low pressure boilers?
• How does the oil spray entering the combustion chamber burn?
• Which condition indicates incomplete combustion in an oil burner?
• Why is it important to maintain the air-to-fuel ratio in an oil burner?
• Periodic boiler inspections must include a check on what aspect?
• Assuming an outside location is impractical, where can the remote control for the oil burner be located?
• Which of the following defines fuel-oil?
• What component is responsible for separating dirt and sediment from fuel oil?
• What is the normal consistency of no. 6 fuel-oil?
• What does the acronym "PSI" stand for in the context of oil burners?
• What is the primary role of an aquastat in an oil burner system?
• What does abatement of air contaminants entail?
• Between what temperatures does the pre-heater bring the oil to?
• The smoke alarm is required as a control for which of the following?
• Which gauge measures the steam pressure inside the boiler?
• What control will shut down a steam boiler if the pressure rises above the set operational limit?
• Which of the following is NOT a step to take when puff-back conditions are identified?
• What is normal oil pressure for no. 6 fuel-oil burners?
• What does the acronym CoF stand for in the context of FDNY certifications?
• What can happen if there is an excessive air supply to the flame?
• What is the primary purpose of an oil burner’s filter?
• What type of maintenance can help prevent oil burner fires?
• Where in an oil pump discharge line shall a relief valve be installed?
• What is a potential risk of an unstable fuel supply?
• What is an oil pressure gauge used for in an oil burner system?
• What classification of equipment is defined by combustion temperatures ranging from 600° F to 1000° F?
• Why is proper ventilation crucial for oil burners?